Robotics, automation, and how a strong network is needed to connect it all up
Manish Sablokk for IoTTech: Cutting-edge robots and other advanced smart machines are set to be added into the rapidly expanding Internet of Things, which is projected to reach 25 billion devices by 2020. Robotics has already been used in manufacturing to great effect for over a decade, performing delicate and precise tasks with a higher success rate than humans. With advancements such as 'deep learning' robots, delivery drones and ubiquitous knowledge-sharing between machines, widespread robotics adoption is becoming far more feasible.
In healthcare, there are already robotic services in operation with automated pharmacy dispensing and robotic trolleys - robots that can navigate between floors and even call the lift using a Wi-Fi sensor. The hospitality sector has also been a keen adopter of robotics to deliver services and in education, robots are being deployed successfully as a tutor, tool or peer in learning activities, providing language, science and technology education. Cont'd...
Industrial digitisation on fast track
The New Indian Express: In a move to build the digital enterprise, the digitisation in industrial sector is set to grow to 65 percent in the next five years as it is a priority of most CEOs in the industry, according to a PwC report.
According to PwC Industry 4.0 report, more than half of the industrial companies in India are using data analytics and over 90 per cent expect data to impact their decision-making in five years.
Globally, digitisation is expected to rise to 72 per cent from 33 per cent, the report noted.
It is also noted that around 39 percent of the companies plan to invest more than 8 percent of their annual revenues in digital programmes in the next five years. Cont'd...
Method for Calculating Moment Loads on Linear Actuators
With the actual equipment, there are various kinds of equipment conditions and driving conditions for electric actuators and cylinders and thus, it is very difficult to explain all the operating conditions.
Is There a Tomorrow for Manufacturing in the United States?
Operators will soon be able to test and optimize the machine settings for the next product in line in the virtual world before they make the physical change-over.
Using Silicon in Lithium Ion Batteries to Increase Capacity
We have demonstrated the ability to electrospin liquid CHS into silicon nanowires that when blended with carbon lead to performance comparable to that achieved by CVD grown silicon nanowires but at reduced cost and simplified scaling.
Where do you get the I/O for the IIoT?
Nick Butler, National Instruments for ControlDesign: Data is the heart of all Internet of Things systems, including systems deployed into industrial environments.
When we talk about making the aging electrical grid smarter or the factory of the future more efficient, what we’re really after are insights that can make our equipment and infrastructure smarter and more efficient. And to deliver these incredibly valuable insights, which will result in millions of dollars in savings, uptime or operational efficiency, we need data. Lots of it. We also need complex, computationally intensive algorithms that scour the data to find trends, patterns and anomalies (Figure 1).
While these algorithms and analysis routines are a very important piece of the IIoT puzzle, the best data scientists in the world cannot predict equipment failures without enormous amounts of data. Cont'd...
How Embedded Devices and the Cloud Are Leading a Paradigm Shift in Manufacturing and Production
This cannot be a simple extension of todays processes, but needs to be a complete rethink of how manufacturing and production systems are designed to take full advantage of the cloud and the analytics that it brings to bear.
Logistic companies Swisslog, Dematic, Egemin and Intelligrated have all been Acquired
All these companies are logistics and material handling vendors and times are changing in logistics and fulfillment
Hitachi Begins Development of Factory Automation Platform as a Service Testbed
Kagan Pittman for Engineering.com: Will the Internet of Things be the future of manufacturing? Global conglomerate Hitachi Group seems to think so.
Hitachi recently partnered with Mitsubishi Electric and Intel to receive approval for their Factory Automation Platform as a Service (FA PaaS) Testbed at the Industrial Internet Consortium (IIC), a global non-profit organization.
The testbed will operate as a testing platform based on the reference model of IIC to test solutions in controlled scenarios that match real-world conditions, for the ultimate purpose of connecting manufacturing sites with head offices in order to streamline their operations.
Hitachi hopes to use the FA PaaS to respond to what they see as a market rapidly growing and demanding faster product development, market introduction, quality improvements and shorter lead times. Cont'd...
What Super-Efficient Manufacturing Looks Like
The Tesla factory in Fremont, California, and the Gigafactory in Nevada are monuments to science and progress.
Schneider Electric's three steps for implementing Industry 4.0
Eric Emin Wood for IT World Canada: Manufacturing companies with visions of incorporating the latest automated, cloud-based, analytical tech into their production process need to recognize the value of a measured approach, an original equipment manufacturing (OEM) veteran says.
Martin Stephenson, vice president of process automation for OEM Schneider Electric Canada, which specializes in power management, building management, datacentres, and process and automation control, says that while some firms are equipped to embrace the change right away, others might find that implementing what he calls “Industry 4.0” isn’t a good fit for them at all.
“Just because you can, doesn’t mean you should,” he says. “Customers need to have a truthful conversation with themselves and say, ‘How do we manage what we do now? Are we ready for this step? … Do we have the right infrastructure? Do we have the right cybersecurity in place?’ There are a lot of discussions to be had before this leap of faith happens.” Cont'd...
10 Ways Machine Learning Is Revolutionizing Manufacturing
Louis Columbus for Forbes: Every manufacturer has the potential to integrate machine learning into their operations and become more competitive by gaining predictive insights into production.
Machine learning’s core technologies align well with the complex problems manufacturers face daily. From striving to keep supply chains operating efficiently to producing customized, built- to-order products on time, machine learning algorithms have the potential to bring greater predictive accuracy to every phase of production. Many of the algorithms being developed are iterative, designed to learn continually and seek optimized outcomes. These algorithms iterate in milliseconds, enabling manufacturers to seek optimized outcomes in minutes versus months.
The ten ways machine learning is revolutionizing manufacturing include the following:
Microscan Visionscape® GigE Camera Performs Precision Measurement of Apertures in Digital Camera Housing at Foxconn
his case study from the electronics manufacturing industry could be applied to other sectors, and as vision technology advances and experience from its practical application is accumulated, there are sure to be even more challenges addressed using precision machine vision solutions.
'UK manufacturers fail to understand Industry 4.0'
Ian Vallely for Works Management: There isn't enough understanding of Industry 4.0 by UK manufacturers, according to a report by BDO in partnership with the Institution of Mechanical Engineers. It said just 8% of UK manufacturers have a significant understanding of Industry 4.0 processes despite 59% recognising that the fourth industrial revolution will have a big impact on the sector, according to the report .
As the increasing use of automation, data exchange, technology and wider supply chain communications driven by Industry 4.0 provides both huge opportunities and threats to UK manufacturing, there remains a ‘gaping hole’ in the education and understanding of Industry 4.0.
According to the BDO Industry 4 0 Report, increased productivity, better data analysis, increased competitiveness and lower manufacturing costs are the top ways in which Industry 4.0 will affect UK manufacturing. Cont'd...
SME Launches High School Membership Program to Build the Manufacturing Workforce Pipeline
With an anticipated skills gap of 2 million jobs by 2025, the manufacturing industry needs to attract and inspire the next-generation workforce,
Records 1861 to 1875 of 1986
First | Previous | Next | Last
Engineering - Featured Product
Datanomix Production Monitoring
Datanomix Production Monitoring delivers instant visibility into your shop floor performance. Through real-time alerts, simple machine connectivity, and our kick-ass coaching, you'll catch inefficiencies early, align your team with meaningful metrics, and respond faster to issues before they escalate. The software adapts without operator input and works out of the box with purpose-built Tracks (Efficiency, Delivery, Tooling, and more). Production Monitoring arms you with the data to make more, waste less, and lead with confidence. And while real-time visibility keeps you sharp in the moment, historical insights ensure you're learning from the past to drive ongoing continuous improvement.
