NORD DRIVESYSTEMS to Exhibit Innovative Logistics Drive Solutions at MODEX 2022

NORD will be at MODEX 2022 in Atlanta, GA showcasing their latest drive technology including their groundbreaking IE5+ synchronous motors, DuoDrive, and NORDAC ON/ON+ variable frequency drives.

NORD DRIVESYTEMS will exhibit their latest innovative drive solutions at MODEX 2022, focusing on technology for warehousing, distribution, and logistics. NORD's modular design offers nearly unlimited versatility with more than 20,000,000 unique combinations of gearboxes, electric motors, and variable frequency drives. From conveyors to storage and retrieval devices, NORD is able to meet a wide range of needs.


NORD will display these specialized solutions for the logistics industry at their booth B7222:

NORDAC ON/ON+ variable frequency drive
NORD developed the NORDAC ON/ON+ VFDs to meet the specialized requirements of horizontal conveyor technology and for the combined use with the new IE5+ synchronous motor generation. The VFDs feature an integrated Ethernet interface, PLC functionality, full Plug-&-Play capabilities, and a very compact design that can be wall or motor mounted. When combined with the NORD modular system, NORDAC ON/ON+ variable frequency drives offer a reliable, highly efficient, economic solution for IIoT environments.

Key Advantages:
- Useable over a wide frequency range
-Future-ready with IIoT capability, firmware update via Ethernet, and integrated PLC
-Power ranges up to 1.27 HP
-Plug-&-Play solution for fast commissioning

IE5+ ultra high-efficiency synchronous motors
The new generation of NORD electric synchronous motors offer the highest operational efficiency on the market today with IE5+ technology. These motors feature a compact footprint that can be installed quickly and easily, even in applications where installation space is limited. They produce energy savings, reduce product variants, minimize operating costs, and operate at the same efficiency even under partial loads and low speed ranges. IE5+ motors are compatible with NORD's modular product system and are available as a non-ventilated variant (N-design) for hygienic wash-down areas or as a ventilated variant (F-design) with a high overload capacity suited for intralogistics.

Key Advantages:
-Power range of 0.5 HP - 5.4 HP
-Optionally available with IP69K protection or nsd tupHTM sealed surface conversion
-Flexible motor mounting: direct mounting, NEMA, IEC
-Constant high efficiency over entire adjustment range
-Reduced Total Cost of Ownership and fast Return on Investment
-U.S. availability
-71N design available now
-90N, 71F, and 90F design available Q3 2022

LogiDrive™ - the solution for intralogistics
NORD's LogiDrive™ solution combines a gear unit, motor, and variable frequency drive to create a solution that is secure, flexible, and 4.0 ready! As a complete package, LogiDrive™ delivers high efficiency and supports large speed ranges to generate automation for stacker cranes, automated transports, and a variety of conveyors for high volume warehousing, manufacturing, and packaging systems.

The LogiDrive™ system consists of:
-High efficiency 2 stage bevel gearbox
-IE5+ permanent magnet synchronous motor
-Decentralized variable frequency drive
-Power plug connector
-M12 connectors
-Incremental encoder
-Pre-assembled cables
-Standardized hollow shaft diameters

Two stage helical bevel gear units
Two stage helical bevel gear units feature efficient operation in a modular design. They are made from a high-strength aluminum alloy and available in two housing designs - open for better heat dissipation for high axial and radial loads and closed for easy cleaning in wash-down applications. These robust gearboxes excel in light conveying and processing applications, providing a more efficient and reliable solution than a typical worm unit.

Key advantages:
-Flexible input and output configurations
-Foot, flange, or face mounting
-Quiet operation
-Up to 97% efficiency
-Large speed range
-High efficiency for low operating costs

NORDBLOC.1 inline gear units
NORDBLOC.1 units are characterized by quiet, reliable performance with a housing design that offers easy cleaning. These innovative and patented gear units do not have bore plugs or assembly covers, and their smooth surface prevents pooling of liquids and solids. High axial and radial load capabilities enable safe operation and the large speed range provides flexibility in applications. Due to reinforced bearings, these units deliver a long service life, granting a low Total Cost of Ownership and fast Return on Investment.

Key advantages:
-Power range 0.16 HP - 50 HP
-High strength, torsionally rigid housing
-High output torque
-Available with nsd tupH and smooth surface motors

Condition monitoring for predictive maintenance
Condition monitoring for predictive maintenance focuses on status-based maintenance rather than time-based maintenance. Operating and drive data are recorded periodically or continuously to optimize the operational safety and efficiency of machines and systems. The data analysis can then be used to extract important information about the drives such as optimal oil change time, early detection of suboptimal operating conditions, and threshold values. The goal of condition monitoring is to proactively maintain machines and plant facilities, reduce downtimes, and increase overall plant efficiency.

Key advantages:
-Early detection and avoidance of suboptimal operation conditions
-Machinery and plant downtimes can be planned
-Longer service life of components and machines
-Increase system availability

Learn more about NORD's logistics solutions at https://digital-trade-fair.nord.com/en-us/modex.

Featured Product

maxon motor’s - The ultra-fast brushless DC motor

maxon motor's - The ultra-fast brushless DC motor

maxon motor launches new high-speed motors that are configurable online. The new ECX brushless motors are quiet and feature very high efficiency. The ECX motors are available with diameters of 8, 16 and 19 mm achieving speeds of up to 120,000 rpm. They run very smoothly and are highly efficient. With maxon motor's online configurator, it is easy to put together a customized DC motor to include gearhead, encoder and controller. The customized motors are ready to ship in 11 days!