Hazardous Location Cabinet Cooler® Systems

Visit https://exair.co/184-Hzccdir for further information

EXAIR's new HazLoc Cabinet Cooler Systems have been set apart from the competition by achieving the UL classified designation for Div I environments. Thermostatically controlled systems are recommended for the highest efficiency and include UL listed solenoids, also for hazardous environments. EXAIR Cabinet Cooler Systems will install on your purged enclosure in minutes, require little to no maintenance and operate under the toughest of industrial conditions. If you require low cost, ease of use and/or reliability - a HazLoc Cabinet Cooler System will meet your needs.

07/28/20, 05:33 AM | Supply Chain, Engineering | EXAIR

These Cabinet Cooler Systems are engineered and approved for use upon purged electrical enclosures found within classified areas. The areas approved are Class I Div 1, Groups A, B, C and D - Class II Div 1, Groups E, F and G - and Class III. EXAIR's HazLoc Cabinet Cooler Systems have been tested by UL and meet the stringent UL requirements for these areas. Cabinet Cooler Systems are a low cost and reliable way to cool purged electric control panels found within these environments. They utilize vortex tube technology to produce up to 5,600 Btu/Hr, with no moving parts, which additionally creates a low maintenance solution for cooling your HazLoc purged cabinets.

EXAIR Hazardous Location Cabinet Cooler Systems are available in 8 different cooling capacities from 1,000 Btu/Hr. to 5,600 Btu/Hr. This range of cooling allows for choosing the best fit for your cooling needs without placing additional demand upon your air compressor. https://exair.co/184-Hzccdir
EXAIR is offering a special right now on all Cabinet Coolers. Learn more at www.exair.com/184/ccpromo.htm

07/28/20, 05:33 AM | Supply Chain, Engineering | EXAIR

Subscribe to Newsletter

More Supply Chain News | Stories | Articles

Featured Product

Model TR1 Tru-Trac

The Model TR1 Tru-Trac® linear measurement solution is a versatile option for tracking velocity, position, or distance over a wide variety of surfaces. An integrated encoder, measuring wheel, and spring-loaded torsion arm in one, compact unit, the Model TR1 is easy to install. The spring-loaded torsion arm offers adjustable torsion load, allowing the Model TR1 to be mounted in almost any orientation - even upside-down. The threaded shaft on the pivot axis is field reversible, providing mounting access from either side. With operating speeds up to 3000 feet per minute, a wide variety of configuration options - including multiple wheel material options - and a housing made from a durable, conductive composite material that minimizes static buildup, the Model TR1 Tru-Trac® is the ideal solution for countless applications.

More Products

Feature Your Product