New 60 mm DG II Rotary Actuator with AlphaStep AZ Series Absolute Encoder Stepper Motor
Retains the ease of use of a stepper motor, while allowing for highly accurate positioning of large inertia loads.
Oriental Motor is pleased to expand the DGII Series product line-up and AlphaStep hybrid control system with the introduction of the new 60 mm DGII rotary actuator.
The DGII Series is a line of products that combine a high rigidity hollow rotary table with an AlphaStep absolute encoder AZ series closed loop stepper motor and driver. It retains the ease of use of a stepper motor, while also allowing for highly accurate positioning of large inertia loads.
The smaller 60 mm frame size is equipped with an AlphaStep AZ Series absolute encoder stepper motor. This new rotary actuator is available to be used with 4 types of AZ Series DC input drivers (stored data type, pulse input driver with built-in RS-485 communications, pulse input type and multi-axis driver with EtherCAT communication).
It is a complete, cost effective, high accuracy rotary actuator system that help eliminate the need for additional sensors. This new combination can work in traditional applications where step and direction are required, or, in applications where PLC or Touch Screens (HMI) are being used, without the need for additional modules connected to the PLC. The end result is a more efficient and energy efficient product that is compatible with a wider range of master controller types and control methods.
To learn more about Oriental Motors new 60 mm DGII Series rotary actuator, contact the Technical Support group at 800-468-3982 or email, techsupport@orientalmotor.com, or visit the web page at:
https://www.orientalmotor.com/rotary-actuators/rotary-actuators-dgii-az-series.html
###
ABOUT ORIENTAL MOTOR
Since its founding in Japan in 1885, Oriental Motor has been a world leader in motion control systems. For over a century, we have concentrated on technological advancement and product design improvement — an emphasis evident in the sophisticated devices we market today.
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
