For this particular project, Dan Nobles and Slice Engineering decided carbon fiber nylon filament would be the best option. Engineered for its intense durability and stability, a carbon fiber nylon material would be capable of handling the high-heat experienced in an engine.

3D Printing New Parts for a Classic Ferrari
3D Printing New Parts for a Classic Ferrari

Joanna Barousse | Slice Engineering

Have you ever needed a low-cost solution to what seemed like a budget draining project? Whether it was for a teeny, tiny hobby related part that makes no sense to machine, or a manufactured mold to be used repeatedly, 3D printing is no stranger to simply solving complex problems. What about replacing, say, parts for a 1983 Ferrari Mondial? That’s right - a Ferrari.

Front end of Ferrari Mondial

Two engineers put their 3D printing know-how to the test. Jeff Wilkinson and Dan Nobles were coworkers years ago and have kept in touch to work on various projects together, including a rebuild and modification of a 1983 Ferrari Mondial.

Ferrari back end

Part of Jeff’s rebuild of the Ferrari involved replacing the sunroof parts and a significant modernization of the old ‘83 Quattrovalvole Ferrari V8. He converted from the original carbureted fuel delivery system to an electronic fuel injection setup, and from distributors to a modern coil on plug ignition system. The latter conversion is where the troubles started. As any car collector will understand, Jeff cares a lot about both the form and function of his vehicles, especially ones that he is sinking many hours into. Moving away from the distributor system to modern injectors with coil packs meant either leaving the end of the spinning camshafts exposed (a major hazard) or reinstalling non-functioning distributor caps. Together, Jeff and Dan concluded that using 3D printed caps to cover the camshafts meant the conversion could go on as planned, creating a safer, more reliable car, without the huge expense of machining custom parts.

parts on table

distributor caps

Completed engine

For this particular project, Dan Nobles and Slice Engineering decided carbon fiber nylon filament would be the best option. Engineered for its intense durability and stability, a carbon fiber nylon material would be capable of handling the high-heat experienced in an engine, as well as provide a matte-black finish to the distributor caps and sunroof parts in Jeff’s Ferrari. With a combination of NylonX from Matterhackers and CarbonX from 3DXTech, Slice Engineering printed Dan Noble’s designs using Slice’s upcoming Copperhead™ Hotend upgrade bundle for the Raise3D Pro2 and the Vanadium™ Nozzles on an Intamsys Funmat HT Enhanced.  Dan Nobles also printed additional parts on his Tronxy 3D printer retrofitted with a Mosquito® Magnum Hotend for higher flow rates and reliability.

The polyamide (Nylon) printed parts were dimensionally accurate enough to be fitted on the engine and sunroof assembly right away, though the camshaft caps will require some post processing, such as sanding and paint, to match the beautiful aesthetics of the hand-painted valve covers. Jeff still has a long way to go before the Mondial is fully operational again, including fully refinishing the interior, but once it is ready to go, the 3D printed parts will withstand many hours in service.

standing around the engine block

 

As Jeff Wilkinson and Dan Nobles were able to find a creative solution to a complex problem, their curiosity drove them to “let form follow function”. Whether you are an engineer, maker, manufacturer or all of the above, Slice Engineering will be at your service to provide you with the highest quality 3D printer components, enhancing your innovations for success. 

Check out the full interview on Slice Engineering’s YouTube channel: New Parts for a Classic Ferrari: 3D Printing with Carbon Fiber Nylon

 

 

 

About Slice Engineering
Slice Engineering (FL, USA) is one of the fastest-growing startups in the additive manufacturing industry. We optimize 3D printer thermodynamics. Our dedicated team of engineers designs and manufactures US-made, high-end 3D printer components for 3D printer manufacturers, businesses, and consumers interested in pushing the boundaries of what is possible with FDM technology. Our ever-growing IP portfolio includes the well-known Mosquito and Copperhead extrusion technologies, and client list includes the US Navy, NASA, Argonne National Laboratory, Lulzbot, Stacker3D, Hage3D, Michigan State University, University of Kentucky, and Case Western Reserve University among others.

 

The content & opinions in this article are the author’s and do not necessarily represent the views of ManufacturingTomorrow

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

OnLogic Karbon 430 Fanless Rugged Computer The K430

OnLogic Karbon 430 Fanless Rugged Computer The K430

OnLogic Karbon 430 Fanless Rugged Computer The K430 packs the power and advanced IoT capabilities of modern Intel processing into a low profile, highly customizable, rugged fanless system built for the challenges of the IoT Edge. Internal components are protected from dust, debris, chemicals, and moisture thanks to fanless and ventless cooling. The Karbon 430 features an operating temperature range of -40° to 70°C, 9~48 V power input, and zero moving parts, all of which help to ensure a long system lifespan.