Designing for the digital world
Tim Fryer for Eureka: Head in sand time is over – Industry 4.0 is happening and is here to stay. In this article, the first in a series, Tim Fryer spoke to some of the leading automation companies about what Industry 4.0 means to design engineers.
The elevator pitch for Industry 4.0 would be something like ‘it is the digitisation of manufacturing and the supply chain’. The three previous industrial revolutions started with steam and mechanisation, progressed onto automated assembly lines at the start of the 20th century, and then the introduction of computers to the work place in the 1970s was the third. Cont'd...
Comments (0)
This post does not have any comments. Be the first to leave a comment below.
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
