ATI INDUSTRIAL AUTOMATION INTRODUCES NEW CAPACITIVE SIX-AXIS FORCE/TORQUE SENSOR
A low-cost solution for industrial robots
The NEW Capacitive F/T Sensor, a low-cost solution for industrial robots, pressing force control, grinding, deburring, etc., was recently introduced by ATI Industrial Automation, Apex, NC. The Capacitive F/T Sensor measures the full six components of force and torque (Fx, Fy, Fz, Tx, Ty, Tz). The sensor is IP65-rated for protection against dust and water spray and hard mechanical stops are implemented for overload protection. Easy output options include computer connection via optional USB and Ethernet conversion cables.
The Capacitive F/Ts Force Range (Fx, Fy, Fz) is 45 lbf (200 N) and Torque Range (Tx, Ty, Tz) is 35 in-lb (4 Nm). Output options include an Ethernet conversion box that allows connection to Ethernet networks, USB conversion cables that allow connection to a personal computer or other devices and is powered by the USB output, and RS-422 serial connection, which provides unterminated wires for data signals and user 5 VDC power input.
ATI also offers a wide range of custom and standard silicon strain gage-based sensor models from 17 mm to 330 mm and include environmental protection (IP) on most models. All ATI F/T Sensors measure six components of force and torque (Fx, Fy, Fz, Tx, Ty, Tz), and feature a compact design, hardened stainless steel construction, high-speed output, overload protection, span temperature compensation options, and high signal-to-noise ratio.
ATI Industrial Automation is a world-leading, engineering-based developer of robotic peripheral equipment, including Automatic Tool Changers, Multi-Axis Force/Torque Sensing Systems, Robotic Deburring Tools, Robotic Collision Sensors, and Compliance Devices. ATIs engineering department, the largest of its kind for a robotic tooling company, is focused on developing cost-effective, state-of-the-art products and solutions that improve robotic productivity.
For more information about the Capacitive Six-Axis Force/Torque Sensor and other ATI products, contact ATI Industrial Automation, 1031 Goodworth Drive, Apex, NC 27539, phone
919-772-0115, fax 919-772-8259, www.ati-ia.com.
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
