MICROMETAL’S MARKET-LEADING EXPERTISE FOCUSES ON THE PRODUCTION OF MESHES & FILTERS USING PHOTO-CHEMICAL ETCHING

In the area of mesh and filter fabrication, the unique innovations that micrometal GmbH has developed to enhance standard and traditional PCE technologies have led to a number of possibilities in design, and tolerance attainment, until now impossible.

(25th November 2022, Muellheim, Germany) Photo-chemical etching (PCE) is renowned today as a metal processing technology that produces stress free, flat components by selective etching through a photo-resist mask. It is especially well suited to the manufacture of precision parts such as grids and meshes, precision filters, sharp piercing or cutting edges, lead frames for integrated circuit boards, fuel cell and heat exchangers plates, precision springs, and washers and gaskets.


In the area of mesh and filter fabrication, the unique innovations that micrometal GmbH has developed to enhance standard and traditional PCE technologies have led to a number of possibilities in design, and tolerance attainment, until now impossible.

Jochen Kern, Head of Sales and Marketing at micrometal says, "When compared with conventional production processes, PCE has a number of inherent advantages, key among which are the ability to produce parts without degrading material properties, the fact that there is almost no limit on part complexity, and the ability to process a huge range of metals and alloys. At micrometal, we have a complete focus on the industrial production of high precision, repeatably accurate micro metal components, and to ensure this the company is constantly evolving the PCE process to offer far superior results than legacy PCE processes. There are three key areas that we have focused on. We use liquid resist rather than dry film resist that enables much higher precision; we offer a continuous PCE process that allows for endless strips of components to be made in huge volumes with no batch-to-batch variations; and we use digitally produced photo-tooling created on glass that achieves unrivalled resolution. Applying all this to the production of meshes and filters leads to some extraordinary results."

When applied specifically to the manufacture of customised meshes and filters, PCE is characterised by a number of process advantages. Lead times are reduced dramatically, as are contingent costs, as tooling set up and iterations are quick and relatively simple. Being digital, the tooling for PCE can be manipulated on screen with ease and take a matter of hours rather than the days or weeks that would be expected with traditional processes.

Also, of particular interest to mesh manufacturers, special features and various aperture shapes can be incorporated in a single mesh without any cost penalty.
Varying bar sizes and open area ratios can be incorporated to control flow rates across the mesh, and something that appeals to design engineers across industry is that micrometal's PCE process allows for far greater open areas than is possible using alternative processing technologies due to its ability to produce tiny and intricate wire sizes.

When compared with woven meshes, the single-part meshes and grids that are produced with PCE can be more cost-effective to produce, and in many instances exhibit superior performance, and can be customised to a specific application or shape requirement. Meshes produced by micrometal are characterised by their consistent cross-sectional thickness and accuracy of aperture shapes and sizes, and as they are manufactured from a single piece of metal, they are slimmer, have greater integrity, and are robust when being handled.

Kern continues, "micrometal makes filters for customers requiring complexity and the achievement of extreme precision. We make filters and screens for a variety of applications in the petrochemical, food, medical, and automotive industries where complexity and precision is often combined with a need for high tensile strength. We offer special features and customised opening shapes with no cost-increase, and a decisive advantage of free structural geometry. The versatility of micrometal's PCE process removes the limitations OEMs consistently experience when designing filters and meshes. This allows us to innovate and open up the opportunity to produce truly customized filters and meshes that meet the exact requirements of a customer's end-use application. We are able to produce highly complex filters and meshes in a variety of metals — including difficult-to-machine materials such as titanium and its alloys — so we can successfully achieve what customers may have previously thought impossible."

The speed, cost efficiency and accuracy of micrometal's PCE process is critical for filter applications. So is the fact that parts are stress- and burr-free, geometric complexity is not constrained and does not increase costs, and design changes are quick and simple through the use of easy-to-create digital / glass tooling.

Using micrometal's PCE process, very small passages with different geometries can be achieved, and customers benefit from an extremely wide range of design options and the choice of a huge variety of metals and alloys. As such, micrometal commands significant market-share in the production of intake grilles, filtration grilles, automotive interior grilles, implantable medical devices, diagnostic / laboratory medical test equipment, and valves

www.micrometal.de

Featured Product

Zaber LC40 Non Motorized Linear Stage Gantry Systems

Zaber LC40 Non Motorized Linear Stage Gantry Systems

A Zaber gantry kit comes with everything you need to build a customized XY gantry system or XYZ gantry system. These gantry systems feature coordinated multi-axis motion, plug-and-play operation, easy integration with end-effector options, and built-in IO and E-Stop capabilities. An intuitive ASCII interface allows the user to easily communicate with the gantry systems using our free software, either Zaber Motion Library with APIs for several popular languages or Zaber Console. Third party terminal programs that can communicate over a serial port can also be used.