Novotechnik U.S. introduces the Vert-X 31E Series

The sensors are touchless magnetic angle sensors with a permanent magnet that can be secured to an application's rotating shaft, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear.

Dorner Launches Next Generation 2200 Series Precision Move Conveyors

When applications call for precise movement of product, then Dorner's newly redesigned 2200 Series Precision Move Conveyor is the answer.

ST Robotics Offers New Super-Fast Robot Arm

ST Robotics recently released a high-speed version of its five-axis vertically articulated R17 robot arm at the low price of $18,600.

Advanced Design & Manufacturing (ADM) Cleveland Continues UBM's Long Running Strategic Partnership Alliance with the Institute of Packaging Professionals (IoPP)

UBM's inaugural ADM Cleveland event, takes place on March 29-30 at the Huntington Convention Center and offers two days of free industry education, packaging focused content, a dynamic expo floor, and a three track conference series spotlighting automotive, medtech, and smart manufacturing. Included on the expo floor are the latest technology and materials specifically geared towards professionals and decision makers in the packaging sector.

Oerlikon announces groundbreaking for advanced materials manufacturing facility in Michigan, USA

Oerlikon expects the demand for advanced materials to increase in the coming years. The facility will produce materials such as titanium alloys, which are in high demand for the additive manufacturing market, and diverse high-end thermal spray powders.

Microscan Launches MicroHAWK® UHD Imagers to Decode Small and Difficult-to-Read Printed and DPM Symbols

New MicroHAWK UHD barcode readers and smart cameras can decode symbols with an x-dimension almost invisible to the naked eye.

Engineers and Students From Across the World Compete to Build a Brighter Future

Engineering Innovation Award: $20,000 Grand Prize

Xilinx Demonstrates Responsive and Reconfigurable Vision Guided Intelligent Systems at Embedded World 2017

Xilinx's tools, libraries and methodologies infuse machine learning, computer vision, sensor fusion, and connectivity into vision guided intelligent systems

Optomec Partners with Tongtai to Deliver Hybrid Additive Manufacturing Machines in Taiwan

The Optomec LENS family of 3D metal printers has been used in industry for over two decades to cost-effectively repair, rework and manufacture high-performance metal components in materials such as titanium, stainless steel, carbides and nickel based super alloys.

Milacron Expands FANUC ROBOSHOT Offering in the Americas with the New ROBOSHOT SI-20A Secondary Injection Unit

The new FANUC ROBOSHOT SI-20A secondary injection unit was designed and developed by FANUC in Japan. The SI-20A continues to offer the same high quality, high technology and precision synonymous with the ROBOSHOT name.

Machine vision gets even more user-friendly: MVTec presents MERLIC 3

 Increased performance and robustness  Deep learning optimizes OCR  Improved reading of bar and data codes

Automate 2017 - KINGSTAR to Show How EtherCAT-enabled Soft PLC Cuts Hardware Costs in Half at Automate 2017

KINGSTAR, the industry's leading provider of EtherCAT-enabled software PLCs and the most complete motion control platform on the market, will showcase its innovative machine automation solutions at booth 349 at Automate 2017, April 3-6, in Chicago, Illinois.

America Makes and ANSI Publish Standardization Roadmap for Additive Manufacturing

The roadmap provides a snapshot of the current additive manufacturing standards landscape and identifies 89 "gaps" - 19 of them high priority - where no published standard or specification currently exists to address a particular industry need. In 58 of those cases, additional research and development (R&D) needs are identified.

BeeHex Raises $1 Million For Fresh Food Robots

3D food printing startup adds Jim Grote, Grote Company founder as partner

Ambionics Achieves Breakthrough Development of Unique Child Prosthetic With Stratasys 3D Printing

-Self-taught father develops customized 3D printed hydraulic prosthetic for two-year old amputee son, avoiding wait for state-developed version -Design and production of 3D printed hydraulic prosthetic enables cost savings of up to 76%, as well as time savings in design and production of 90% compared to traditional methods

Records 1696 to 1710 of 3912

First | Previous | Next | Last

Featured Product

Emulate3D Engineering Software Creates Your Advantage

Emulate3D Engineering Software Creates Your Advantage

Emulate3D software helps you model and test your AMHS solutions rapidly. Use Demo3D to create running models quickly, then generate videos, stills, or view the models in virtual reality at the click of a button. Sim3D enables you to carry out experimental test runs to select optimal solutions and the most robust operating strategy, and Emulate3D Controls Testing is the best way to debug your PLCs offline, and off the project's critical path. Connect to major PLCs, import CAD, and plug into HTC Vive and Oculus Rift to produce awesome models!