All Manufacturing and Automation News Headlines

ADVANCED Motion Controls announces expanded micro Z-Drive capabilities

06/03/15, 02:19 PM | Automation & IIoT, Additive & 3D Printing | ADVANCED Motion Controls

Available immediately are the AZBH10A4 and AZBD10A4 micro-sized analog plug-in brushless servo drives. These new models add Hall Velocity mode and Duty Cycle mode capabilities to the µZ series. Pronounced 'micro-Z' these plug-in drives are the smallest off-the-shelf servo drives from ADVANCED Motion Controls and are designed for embedded applications in a wide range of industries including: Robotics, Lab Automation, Homeland Security/Military, Electric Mobility, Medical and Packaging. These micro sized servo drives are designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drives are designed for direct integration into your PCB. Weighing in at just 9 grams, these drives output 10A peak and 5A continuous and operate with a bus voltage range of 10-36VDC.

MUSCLE CORPORATION'S YUME ROBO WELCOMES ROBOT REVOLUTION EXHIBIT GUESTS AT MUSEUM OF SCIENCE AND INDUSTRY, CHICAGO

06/03/15, 01:52 PM | Additive & 3D Printing, Engineering

Exhibit Supported by Google.org Features Muscles Yume Robo and Begins National Tour in Chicago

BLUE OCEAN ROBOTICS, APS EXPANDS OPERATIONS INTO THE UNITED STATES

06/03/15, 01:51 PM | Additive & 3D Printing, Engineering

New U.S. Based Blue Ocean Robotics, LLC Opens Office in Cincinnati

24 of the World's Best Robots in Los Angeles Area to Compete in DARPA Robotics Challenge Finals

06/03/15, 01:51 PM | Additive & 3D Printing, Engineering

DARPA Robotics Challenge June 5-6, 2015 at The Fairplex, Pomona, California

Humanistic Robotics Teams up with DARPA to Elevate Safety at the Robotics Challenge Finals

06/03/15, 01:50 PM | Additive & 3D Printing, Engineering | Humanistic Robotics / HRI

Wireless Emergency Stop Technology Now Required for all Challenge Entries

Robotmaster now supporting Nachi brand of robots

06/02/15, 06:32 AM | Additive & 3D Printing | Robotmaster (Hypertherm Inc.)

Nachi is one of the major robot manufacturers in Japan and supporting them will allow Robotmaster to continue contributing to better productivity for programming welding as well as a variety of robotic applications.

Adept Technology Adds New Distributor

06/01/15, 10:30 AM | Additive & 3D Printing, Engineering

Applied Controls Will Market and Support Adept Robots in U.S. Mid-Atlantic Region

Machine Automation Under Scrutiny for High-volume, High-Quality Manufacturing

06/01/15, 10:29 AM | Additive & 3D Printing, Engineering | NEXCOM

Designed for many industrial automation, quality assurance, security and medical applications, NEXCOMs new ROKA series of Gigabit Ethernet cameras is a low cost yet highly versatile imaging solution.

AgTechTalk Owner Chad Colby Joins 2015 Commercial UAV Expo Advisory Board

06/01/15, 10:28 AM | Additive & 3D Printing, Engineering

Colby to provide insight on UAV technology as a tool for agriculture industry as an Advisory Board member for SPAR Point Group's 2015 Commercial UAV Expo

PI's New Sophisticated Hexapod Motion Controller

06/01/15, 10:27 AM | Additive & 3D Printing, Supply Chain

The new smaller and more powerful C-887.52 hexapod controller, just released by PI, makes hexapod 6-D positioning easy.

The Amazon Robotics Challenge. And, the winner is...

06/01/15, 10:26 AM | Additive & 3D Printing, Engineering | Barrett Technology

Of 25 teams from around the world, the winner of the Amazon Robotic Bin-Picking Challenge is the Technische Universität Berlin using Barrett's WAM robotic arm.

DJI and Accel Launch SkyFund to Seed Innovation Across the UAV Ecosystem

05/29/15, 10:49 AM | Additive & 3D Printing, Engineering

SkyFund aims to accelerate entrepreneurship throughout the aerial economy

Schunk - High-speed picker with safety functionality

05/29/15, 10:35 AM | Additive & 3D Printing, Supply Chain | SCHUNK

Compared with electrically operated small component grippers that are available on the market the SCHUNK EGP features high speed with simultaneous high gripping force, which can be adjusted in two or four steps, depending on the model.

Advanced Motion Controls Expands their EtherCAT Product Offering

05/29/15, 10:13 AM | Automation & IIoT, Additive & 3D Printing | ADVANCED Motion Controls

ADVANCED Motion Controls provides products for the fastest, most flexible form of industrial Ethernet control - EtherCAT.

Perception Neuron Wraps Up Silicon Valley Tour After Attending Maker Faire and SVVR 2015

05/29/15, 10:11 AM | Additive & 3D Printing, Engineering

The worlds first fully adaptive and affordable motion capture system made a guest appearance at Maker Faire Bay Area, and offered virtual reality demos and joined industry luminaries in a panel about the future of Virtual Reality input devices during SVVR in San Jose

Records 14041 to 14055 of 14398

First | Previous | Next | Last

Featured Product

PI USA - Hexapods for 6-Axis Precision Automation

PI Hexapods simplify multi-axis alignment / positioning with a programmable pivot point, tool/work coordinate systems, virtual programming software.

More Advanced Manufacturing and Factory Automation Products | Feature Your Product