4D-Printed Concept Car Will Predict Your Wishes
Viknesh Vijayenthiran for Discovery News: New materials will also play a significant role in the further evolution of the car, according to BMW. This has already started with the increasing use of carbon fiber and other composites instead of conventional steel.
Looking further forward, technologies such as rapid manufacturing and 4-D printing (3D-printed materials that change depending on conditions) will open up new possibilities.
One of the more interesting aspects of the concept is a technology called Alive Geometry which consists of 4D-printed components that can change their shape and interact with the driver. Full Article:
Comments (0)
This post does not have any comments. Be the first to leave a comment below.
Featured Product
Cold air to -50°F (-46°C) from your compressed air supply - with no moving parts!
A low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts.
Vortex tubes can produce:
• Temperatures from -50° to +260°F (-46° to +127°C)
• Flow rates from 1 to 150 SCFM (28 to 4248 SLPM)
• Refrigeration up to 10,200 Btu/hr. (2571 Kcal/hr.)
Temperatures, flows and refrigeration are adjustable over a wide range using the control valve on the hot end exhaust.
EXAIR Vortex Tubes are constructed of stainless steel. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures that EXAIR Vortex Tubes will provide years of reliable, maintenance-free operation. https://exair.co/184_530
