ROBOCHOP: Interactive Installation Allows Internet Users Worldwide to Remotely Control a Pop-up Robotic Plant

From Clemens Weisshaar and Reed Kram:

From March 16-20, 2015 internet users and visitors to CODE_n (Hall 16) at CeBit in Hanover will be able to use an online app connected to the ROBOCHOP installation to design and fabricate a piece of furniture in real time.

The ROBOCHOP interface lets participants instruct a robotic arm to grab and sculpt a prefabricated 40 x 40 x 40cm durable foam cube using a floor mounted hot wire tool to create the object of their choice.

The pop-up robotic plant has been conceptualised, coded and built by KRAM/WEISSHAAR. ROBOCHOP features a needle gripper as the robot’s hand, coaxial cooling of the cutting wire and sensors to measure the wire’s tension and provide direct feedback to the system. This harnesses the robot’s brute force and allows it to sculpt hundreds of unique objects consecutively with elegance and precision. Once manufacturing is complete, each custom object is packaged and posted to the user anywhere in the world entirely free of charge... (full release) (homepage)

 

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.