Food and beverage processors speed repairs and reduce costs by working with single source for full gamut of machine repairs, from electronic controllers to motors.

One-Stop Repair for Food & Beverage Processing Equipment

Contributed by | K+S Services

 

From initial preparation to packaging, the food and beverage manufacturing sector incorporates a very broad range of advanced technologies into highly sophisticated processes. For many enterprises, processing equipment must endure long, punishing production runs that require precise operations and sanitary conditions. All of these requirements make the effective and timely repair or replacement of equipment a critical necessity

Given the vast array of mechanical and electronic parts involved, the seemingly straightforward task of maintaining equipment often presents a logistical nightmare that involves farming out components to a variety of specialty repair shops with variable capabilities, quality, pricing and turnaround time.  

Fortunately, the repair services industry is responding by broadening its capabilities to provide more of a one-stop-shop service for food and beverage processing companies, often with facilities strategically located near major manufacturers or manufacturing regions.

 

Specialized equipment

Food and beverage processors often incorporate manufacturing technologies that are subject to unusual requirements. For many production line configurations, plants are dependent on the entire line of equipment running harmoniously.

The motors used for food preparation processes such as grinding, mixing and conveying must often operate without fault for long intervals. These motors, many of which are electric, need the proper AC and DC drives to operate efficiently and keep energy costs under control. Some motors are exposed to harsh conditions such as washdowns, and must be protected from overspray. Pump motors may be fully enclosed, making routine maintenance more challenging.

Modern processing plants often incorporate HMI (human-machine interfaces) panels and SCADA (supervisory control and data acquisition) systems to control equipment automatically and remotely. Food processing lines often use HMIs to store recipes that can be recalled or adjusted on the fly.

PLCs (programmable logic controllers) are used to automate many electromechanical processes, providing systems such as ovens and bottling operations the ability to communicate via sensors and other devices, regardless of equipment manufacturers. This capability is providing food and beverage processors with “smart” processes that improved control, flexibility and economies.

Given the variety and complexity of machine components, repair or replacement often involves sending specific components out to specialty repair shops.  For example, a hydraulic component repair shop does not have the capability to also repair motors; a motor repair shop cannot replace power supplies, I/O, memory or communication cards in sophisticated PLC systems; and robotic equipment must usually be repaired at a dedicated facility.

However, where these services can converge are with larger international repair service companies such as K+S Services. Due to size and expertise in many industries from automotive to aerospace, they are equipped to offer an array of repair services under one roof.  

For the food and beverage processing industry specifically, it is rare to find a repair service company that offers the full gamut of repair and replacement services.

This includes the repair or replacement of components, including major manufacturer brands for the mechanical (servo motors, gear boxes and gear reducers, brake assemblies, vacuum pumps and blowers, air/fluid pumps, ballscrews) to the hydraulic (pumps, motors, cylinders, rotary actuators, servo valves).  

In addition, the company can handle sophisticated electronic components including, replacement of controller cards for power supply, I/O, communication and memory, as well as HMI control panels.  For robotic elements, K+S draws on its extensive expertise in the automotive manufacturing industry.

Regardless of the type of part, it is important to look for a repair company that will conduct an initial evaluation to identify the probable cause of failure, and then repair and test the part according to the manufactures specifications and test procedures.

 

Proximity of Repairs

K+S Services is unique in the repair service business as it pursued a strategic model of expansion by opening new locations in close proximity to existing major plants, as well as geographic regions that attract and support U.S.-based manufacturing.  

The company now operates twelve facilities across the globe, including the U.S., Mexico, Canada, and Europe.  More than just a storefront with a lone representative that coordinates with a larger office, these repair facilities are fully equipped and functioning shops with managers, technicians and spare parts at each location.

Proximity, after all, has many advantages for the manufacturer.  First and foremost, having a repair service in close proximity means repairs can be completed faster and the maximum possible uptime maintained.  Today, most manufacturing plants need replacement parts quickly due to decreased on site spare parts inventory.

In the event of an emergency, turnaround time is practically negligible. Cases exist where a part has been picked up in the morning, repaired, tested, and returned that same day.

If physical proximity in terms of location has its benefits, there is no relationship closer than having a repair service representative stationed within the plant itself.    

In K+S’ Smart Total Asset Management Program (STAMP), customers are assigned a full-time, on-site account manager to serve as a one-stop facilitator and manager of all repairable assets within a specific plant.

This includes tracking all repairs, expediting when required, shipping or delivering to and from the nearby repair facility, maintaining database integrity, streamlining and stabilizing procedures, generating a wide variety of reports and keeping the customer informed throughout the process.

Proof of the success of this business model rests with the number of corporations ascribing to it. Major companies such as Continental, GM, Fire Stone, Ford, Goodyear, GE Air, Chrysler, and UTC are current STAMP customers. K+S successfully services well over 800 manufacturers.

 

About K+S Services Inc.
K+S Services, Inc. is a global supplier specializing in the repair of industrial automation components such as servo drives and welders. Since 1982, K+S has been repairing automation for industries such as Tire and Rubber, Mining, Aerospace, Food & Beverage, White Goods, Petrochemical, Paper & Pulp, Steel, Printing, Plastics, Automotive and Tier 1 Automotive to name a few. We specialize in electronic components such as PLC's, servo drive repair, robotics, servo motor repair, monitors, encoders, CNC systems, laser scanners, spindle repair, power supplies, operator panels, welder repair, weld controls and other electronic equipment. Our mechanical division specializes in the AC and DC servo motor repair, servo valves, actuators, hydraulic cylinders, motors, vacuum pump repair, spindle repair and precision rotating devices, ballscrews, and most motion, automation, and flight simulation equipment.

 

 


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

EXAIR Corporation - CE Compliant Cold Gun

EXAIR Corporation - CE Compliant Cold Gun

In addition to producing a cold, quiet stream of air to reduce heat buildup on machining operations, EXAIR's Cold Gun Aircoolant System™ has also met the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark. The Cold Gun is a low cost alternative to expensive mist systems. It eliminates the ongoing costs associated with the purchase, filtration and disposal of liquid coolants. In addition, there are no worker related health problems resulting from breathing airborne coolants or slipping on wet shop floors. The Cold Gun Aircoolant System incorporates a stainless steel vortex tube to convert an ordinary supply of compressed air into a cold 20°F (-7°C) air stream at one end and a hot exhaust at the other. There are no moving parts to wear out. The Cold Gun now features an improved muffler on the hot air exhaust to reduce the noise level to a quiet 70 dBA.