MIT Builds Invisible Fish Grabbing Robot
Matthew Humphries for PCMag: Catching a fish can be tough, even if you are just trying to net a goldfish in a small tank. That's because the fish spots the danger and makes a swim for it. But what if you didn't need a net because you're controlling an invisible grabbing robot?
That's what Xuanhe Zhao, a professor of mechanical engineering at MIT succeeded in creating, but its applications go way beyond catching and releasing fish unharmed.
The robot is constructed of a transparent hydrogel, which is strong and durable but mostly made of water. As the video below explains, each arm of the robot is constructed from 3D-printed hollow cubes of hydrogel, which are then linked together. By injecting water using a syringe it's possible to make the arms curl and uncurl quickly in a grabbing motion. Cont'd...
U.S. investors see more automation, not jobs, under Trump administration
David Randall for Reuters: When U.S. President-elect Donald Trump criticized United Technologies Corp's (UTX.N) Carrier unit in November for its plan to move some 800 jobs to Mexico, the parent-company made a swift decision to keep the factory in Indiana.
Yet, the move did not translate into saving jobs. Instead, the company decided it would move toward automation as a way to cut costs.
"We're going to make up [the] $16 million investment in that factory in Indianapolis to automate, to drive the cost down so that we can continue to be competitive," chief executive Greg Hayes said on CNBC last month. "What that ultimately means is there will be fewer jobs."
Swapping robots and software for human labor has underpinned much of the productivity gains in the United States over the last 25 years. Now, with a greater political push to keep factories at home, investors are betting that automation will gain speed in industries ranging from auto manufacturing to chicken processing to craft beer breweries. Cont'd...
Adidas reveals plans for 3D printing 'Speedfactory'
Corey Clarke for 3DPrintingIndustry: Adidas is moving closer to a 3D printing shoe manufacturing revolution. As previously reported the sports shoe manufacturer used 3D printing to produce the Ultraboost Parley and 3D Runner releases in 2016. This year, Adidas are keen to up the tempo with their Speedfactory concept.
Industrial factories where 3D printing and robotics manufacture sneakers on-demand are at the core of the plan. Manufacturing will also become localized, eliminating costs associated with logistics and supply chains. Large-scale production at German Speedfactory in Ansbach is set for mid-2017, with Adidas expecting to create 500,000 shoes a year in the future. While in the U.S, Adidas has announced plans to create a Speedfactory in Atlanta in late-2017. Cont'd...
Maintenance Trends in 2017
Remember that these trends are already in place, for the most part. What you'll deal with are advancements and enhancements that make the trends more apparent.
What is Smart Manufacturing & the Smart Factory?
Smart Manufacturing and the Smart Factory enables all information about the manufacturing process to be available when and where it is needed across entire manufacturing supply chains and product lifecycles.
ASU site of largest academic additive manufacturing center in the southwest US
Gail Overton for LaserFocusWorld: By forming a partnership with Concept Laser (Grapevine, TX), Honeywell Aerospace (Phoenix, AZ), and Phoenix Analysis & Design Technologies (PADT; Tempe, AZ), the largest additive manufacturing (AM) research facility in the Southwest is now on the Polytechnic campus of the Polytechnic School at Arizona State University (ASU; Tempe, AZ). The 15,000 square foot center holds over $2 million of plastic, polymer, and 3D metal printing equipment and the Polytechnic School at ASU offers the only manufacturing engineering undergraduate degree in Arizona and is one of only 22 ABET accredited manufacturing engineering programs in the United States.
The lab has a Concept Laser M2 cusing and Mlab cusing machine which are dedicated to 3D metal printing, also known as metal AM. Unlike conventional metal fabrication techniques, AM produces fully dense metal parts by melting layer upon layer of ultrafine metal powder. The Polytechnic School is using the machines for a wide range of research and development activities including materials development and prototyping complex mechanical and energy systems. Cont'd...
Special Tradeshow Coverage for ATX West 2017
ATX West will be held from February 7th - 9th in Anaheim, California. This ManufacturingTomorrow.com Special Tradeshow report aims to bring you news, articles and products from this years event.
3D graphene: MIT scientists develop super-light, super-strong structure
Weston Williams for The Christian Science Monitor: Many scientists consider graphene to be one of the most potentially useful materials ever created. The atom-thick chain of carbon atoms are strong, light, and promise many applications, from energy storage to pollution removal to waterproof coating.
While graphene has been studied since the 1940s, scientists have had considerable trouble constructing it into a structurally useful form on a three-dimensional level. But now, scientists at MIT have figured out how to build up graphene into useful, 3-D shapes with the potential to be lighter and stronger than steel.
The new research marks an important step forward for the material. The hexagonal structure is essentially an "unrolled" carbon nanotube only an atom thick, usually only functional on a two-dimensional level. Despite this limitation, graphene is more than 100 times stronger than steel, and converting that two-dimensional strength into a structure usable for three-dimensional building materials has for years been something of a holy grail for graphene researchers. And now, scientists may be one step closer to that conversion. Cont'd...
CES 2017 - MarkForged 3D prints metal
From CES 2017: From the company that revolutionized 3D printing with composite carbon fiber, comes a breakthrough in metal. The Metal X greatly accelerates innovation, delivering metal parts overnight using a new technology at a fraction of the cost. Leave 20th century manufacturing in the dust and create anything from industrial replacement parts to injection molds to working prototypes.
Manufacturers most upbeat in two years, ISM survey shows
Jeffrey Bartash for MarketWatch: American manufacturers finished 2016 on a wave of optimism, as a survey of executives hit the highest level in two years. The Institute for Supply Management said its manufacturing index climbed to 54.7% in December from 53.2%, slightly higher than the MarketWatch forecast. Any number above 50% signals expansion.
The index is compiled from a survey of executives who order raw materials and other supplies for their companies. The gauge tends to rise or fall in tandem with the health of the economy.
New orders and production surged in the final month of the year and plans for employment also edged higher. Bradley Holcomb, chairman of the ISM survey committee, said comments from executives were largely positive. Cont'd...
Year in Review: Industry Embraces Supply Chain Trends of 2016
There is still much work to be done with regard to technological advancement and operational process before the 2016 trends peak, but there's no doubt that the manufacturing industry is evolving like never before.
YCF - 2017 could be year of smart factory
Katie Mallinson for B Daily: 2017 could be the year of the smart factory. That’s the opinion of Huddersfield-based YCF – the not-for-profit organisation committed to supporting the manufacturing industry and its supply chain.
The statement follows months of speculation around Industry 4.0 – the idea of automation and data exchange in manufacturing technology.
Simply, it’s the computerisation of manufacturing, involving systems that communicate with each other, monitor physical processes and make decisions. And YCF’s CEO Jill Mooney thinks that 2017 could be the year that manufacturers start to plan the implementation of such machinery. Cont'd...
Dubai Govt, US startup to team up for 3D printing
Paromita Dey for Construction Week Online: The Dubai Government is set to collaborate with US-based startup, Cazza Construction Technologies, to aid 3D printing in the country through the company's construction automation technologies.
According to the 'Dubai 3D Printing Strategy', which was launched by UAE Vice President, Prime Minister and Ruler of Dubai, Sheikh Mohammed bin Rashid al-Maktoum in April this year, 25% of the buildings in the emirate will be based on 3D printing technology by 2030, and this percentage will rise with the development of global technology as well as growth of market demand.
Chris Kelsey, CEO of the Silicon Valley-based startup, said: “We were one of many groups invited to showcase our technologies in Dubai. The government has been looking around the world, whether it was companies from the Netherlands, China, Russia, or the USA to see the upcoming technologies involving construction automation and 3D printing. Cont'd...
Using 3D Printing, Lithography & Soft Robotics: New Prosthetic Hands Made for $50 at Cornell
Bridget Butler Millsaps for 3DPrint.com: What’s so incredible about the soft robotic hand created by a team at Cornell? It can grip, sort, and sense what it is touching. But what’s truly astounding is the potential it offers in terms of price and prosthetics for the future. Bringing forth further innovation and progress to the world of robotics, at $50 one can see how it might have realistic, significant impact on numerous levels.
Dispelling the idea of robots as lovable but clunky machines with a steel and rigid grip, Cornell researchers have managed to create what looks like—and offers the feel of—a human hand. This means that the task list for robots may expand exponentially as they are able to handle more delicate items, to include items like food and other fragile products. This also means that they would be able to work with people without injuring them, such as in a medical setting. Cont'd...
One-Stop Repair for Food & Beverage Processing Equipment
Food and beverage processors speed repairs and reduce costs by working with single source for full gamut of machine repairs, from electronic controllers to motors.
Records 781 to 795 of 921
First | Previous | Next | Last
Supply Chain - Featured Product
Strain Wave Gearheads by maxon - Highly precise, compact, and efficient.
Strain wave gearheads are ideal for use in applications requiring precision motion control and high torque transmission in a compact design. maxon strain wave gearheads are a specialized type of gearhead where precision and compact design are crucial. This type of gearhead is often used in applications in a confined space. With their advanced gear tooth design, maxon's strain wave gearheads provide high efficiency and good back drivability. Typical applications include:
Robotics, Aerospace, Medical technology and Optical systems
.
