Mobile Robotic Fabrication System for Filament Structures

The project Mobile Robotic Fabrication System for Filament Structures, developed by ITECH graduate Maria Yablonina, demonstrates a new production process for filament structures. It proposes multiple semi-autonomous wall climbing robots to distribute fiber filament, using any horizontal or vertical surface, or even existing architecture, to support the new structures. Compared to larger scale industrial robots that are limited by position and reach, these robots are enabled with movement systems and a collection of sensors that allow them to travel and interact accurately along typical ground, walls, roofs, and ceilings. One can imagine a fabrication process where an operator arrives to the scene with a suitcase housing all the necessary robots and materials to create a large structure. These agile mobile robotic systems move robotic fabrication processes beyond the constraints of the production hall, exposing vast urban and interior environments as potential fabrication sites.

New Materials for Manufacturing: The Economist's Overview For 2015

From The Economist's Technology Quarterly: This is what some scientists describe as a “golden age” for materials. New, high-performing substances such as exotic alloys and superstrong composites are emerging; “smart” materials can remember their shape, repair themselves or assemble themselves into components. Little structures that change the way something responds to light or sound can be used to turn a material into a “metamaterial” with very different properties... ...When it comes to making chemical bonds, one element, carbon, is in a league of its own; a more or less infinite number of distinct molecules can be made from it. Chemists call these carbon-based molecules organic, and have devoted a whole branch of their subject—inorganic chemistry—to ignoring them. Mr Ceder’s Materials Project sits in that inorganic domain. It has simulated some 60,000 materials, and five years from now should reach 100,000. This will provide what the people working on the project call the “materials genome”: a list of the basic properties—conductivity, hardness, elasticity, ability to absorb other chemicals and so on—of all the compounds anyone might think of. “In ten years someone doing materials design will have all these numbers available to them, and information about how materials will interact,” says Mr Ceder. “Before, none of this really existed. It was all trial and error... ( full article )

Shootout: Fiber Laser Vs Vertical Milling In 3D Deep Engraving

Fonons Canyon 3D Deep-Engraving System cost is less expensive, deep-engraves at almost 2X the processing speed, requires no consumables and is 100% maintenance-free. There is no workplace or environmental hazards with a superior quality of workmanship when compared to vertical milling machines.

Nobilia uses IoT to create smart factory

Kitchen maker Nobilia has rolled out IoT and automation systems in its German factories to enable real-time tracking of furniture as it progresses through the manufacturing process. The company, which has distribution in Australia, is using Beckhoff automation technology that is powered by Intel processors. A barcode that is attached to furniture is encoded with details including processing steps, components required to be added to complete it, and logistics information such as where the finished product is to be delivered. “Each processing machine scans the barcode and retrieves the associated machining data from a central database. Data connecting the whole factory together makes it possible to produce 2700 kitchens daily,” Intel said in a blog post. “Through real-time tracking enabled by Intel IoT technologies, Nobilia knows exactly where each part is in the production process at any time. “If one of the manufacturing lines shuts down, parts are automatically rerouted to another line.”

Riddle of Cement's Structure is Finally Solved

From MIT News: Concrete is the world’s most widely used construction material, so abundant that its production is one of the leading sources of greenhouse gas emissions. Yet answers to some fundamental questions about the microscopic structure and behavior of this ubiquitous material have remained elusive.   Concrete forms through the solidification of a mixture of water, gravel, sand, and cement powder. Is the resulting glue material (known as cement hydrate, CSH) a continuous solid, like metal or stone, or is it an aggregate of small particles... ... Roland Pellenq, a senior research scientist in MIT’s department of civil and environmental engineering, director of the MIT-CNRS lab 2 hosted by the MIT Energy Initiative, and a co-author of the new paper, says the work builds on previous research he conducted with others at the Concrete Sustainability Hub (CSHub) through a collaboration between MIT and the CNRS. “We did the first atomic-scale model” of the structure of concrete, he says, but questions still remained about the larger, mesoscale structure, on scales of a few hundred nanometers. The new work addresses some of those remaining uncertainties, he says. ( full article )

Three Reasons Why Advanced Manufacturing Institutes Matter

American manufacturing is surging with almost 900,000 new jobs created in the past six years. While thats incredible progress, how do we take manufacturing to the next level?

3D printing software, sensors, and carbon nanotubes among top Advanced Materials trends of 2016

By Kira for  The first month of 2016 is now behind us, and the year is shaping up to be particularly interesting in terms of 3D printing trends. In the advanced materials sector specifically, emerging technologies firmLux Research has predicted that the top three ‘undercover’ advanced materials trends of 2016 include improved 3D printing software and formats, Carbon nanotube products, and IoT devices embedded with sensing materials.   Cont'd...

Five Reasons Why Manufacturers Are Embracing IoT

The Internet of Things (IoT) is enabling manufacturers to be more efficient, productive and profitable in the face of increased competition worldwide. We look at five reasons why manufacturers are betting big on these new technologies.

New Ultrasonic 3D Printing Process Can Create and Print High-Tech Composite Materials

Scott J Grunewald for  A team of engineers from the University of Bristol — comprising Thomas M. Llewellyn-Jones, Bruce W. Drinkwater and Richard S. Trask — have developed a new hybrid type of 3D printing that can both assemble and print with composite materials using a combination of desktop 3D printer technology, light-curable resins and ultrasonic waves. This new process can allow super strong and lightweight composites like the variety used to produce tennis rackets, golf clubs, professional bicycles or even airplane parts to be used with additive manufacturing technology. Needless to say these new material options will offer entire new industries the ability to incorporate 3D printing into their manufacturing workflow. And the best part is that for the most part the process was made using existing 3D printing technology. Composite materials are made by combining micro-structures of glass or carbon fibers with a plastic material. The carefully arranged fibers lock together and give the new material its strength and durability, while the plastic ensures that the resulting material will be lightweight. Currently, composite materials are manufactured as thin sheets that are then layered and cut into the desired shape and thickness. The problem with using this as a 3D printing material is the small fibers in the composite materials. In order to produce the desired strength the fibers need to be aligned in a very precise structure, which is currently not possible to reproduce using a 3D printer.   Cont'd.. .

MesoGlue: Room Temperature Metallic Glue

From Hanchen Huang of Northeastern University: MesoGlue is our revolutionary joining solution that lets you attach items together with a metal bond, at room temperature. This is like welding or soldering, but without the heat! The patented process gives you the strength and thermal/electrical conductance of a metal bond, with the ease of attachment of glue or tape. Surfaces are merely pressed together to form a very strong connection. Our MesoGlue technology can be applied to nearly any flat surface. The surface can be rigid or flexible, and roll-to-roll processing is possible. We currently offer coating of two joining surfaces at our state of the art processing facility. Items of up to approximately 1 cubic foot can be accommodated. MesoGlue Silver: A pure silver bond offering the highest electrical and thermal conductivity. Formation of the bond requires moderate pressure. MesoGlue Eutectic: A bond made of primarily copper with other metals added to help the process. Formation of the bond requires only fingertip pressure. (MesoGlue Homepage)

3D Printing of Motors and Electronics

My research involves developing techniques to 3D print electric motors and electronics. This goes beyond the usual 3D printed structures - structures dont do anything. To do things, we need motors and electronics to control those motors.

Robotic Additive Manufacturing Platform for 3D Printing Composite Parts

The first-of-its-kind solution consists of a standard commercially available robot, composite deposition end-effector hardware and a comprehensive software suite.

3D Printing and Acoustics: Rapid Prototyping of Sound Diffusers

By being able to design diffusers in 3D and print them, we streamline the prototyping process tremendously. We can do virtual simulations with the 3D models to get a sense of the effectiveness, and we can make aesthetic or functional changes before its printed.

Special Tradeshow Coverage for FABTECH 2015

FABTECH 2015 will be held from November 9th - 12th in Chicago, Illinois. This Special Tradeshow report aims to bring you news, articles and products from this years event.

Cisco Teams Up with Robotics Firm Fanuc for IoT

by Zacks Equity Research:  Technology giant and Dow component Cisco Systems, Inc. recently entered into a strategic alliance with a robotics company Fanuc America, thereby stepping up its efforts to make itself a key player in the Internet of Things (IoT) space.  Per the alliance, Fanuc and Cisco have built an IoT system that enables Fanuc to monitor every robot on the factory floor. This way it can be determined whether a robot is likely to fail, so that a service technician can fix the equipment before it stops working. This could save companies hundreds of dollars of fixing cost. Per Cisco CEO Chuck Robbins, downtime for these robots can cost a business $16,000 per minute. Therefore, the new system that offers predictive maintenance can be a big thing for some operations. The companies are currently testing the system in a channel that comprises around 1,800 robots and includes Fanuc customer, GM. In this testing period, Fanuc says its customer has saved $38 million. Fanus has plans to expand the system to 2,500 robots by the end of the year. Cont'd...

Records 616 to 630 of 658

First | Previous | Next | Last

Processing & Handling - Featured Product

HEIDENHAIN - Linear Encoders for Length Measurement

HEIDENHAIN - Linear Encoders for Length Measurement

Nothing beats the positioning accuracy of linear encoders from HEIDENHAIN. Available in absolute and incremental versions and ideal for a variety of applications-including machine tools, semiconductor machines and medical machines-these measuring solutions combat a variety of issues that erode precision.