Simulating Clearpath Robots In Maplesim
If your robotics research depends on accurate models, you may want to consider looking at MapleSim® 2015 - a high performance physical modeling and simulation tool developed by Maplesoftâ„¢.
ABB's Acquisition of Gomtec Expands Collaborative Robotics Portfolio
ABB, a leading power and automation group, announced it acquired Gomtec GmbH to expand its offering in the field of collaborative robots. The parties agreed not to disclose financial terms of the transaction.
Gomtec, based near Munich, Germany, is a privately held company that develops mechatronic systems combining mechanical, electrical, telecommunications, control and computer engineering for customers in diverse industries. It has 25 employees.
Gomtec's technology platform will strengthen ABB's development of a new generation of "safe-by-design" collaborative robots that can be operated outside of cages or protective fencing, expanding opportunities to deploy them in new applications.
25 teams prepare for 2015 DARPA Robotics Challenge Finals
By David Szondy for Gizmag: On June 5 and 6, the 2015 DARPA Robotic Challenge (DRC) Finals will take place at Fairplex in Pomona, California. Open to the public, it will see 25 international teams compete for US$3.5 million in prizes as part of an effort to develop robots for disaster relief. Here's what to expect.
This year's challenge will see 25 teams competing. Half of the teams are from the United States, five are from Japan, three from Korea, two from Germany, one from Italy, one from Hong Kong, and one from the People’s Republic of China. They will be vying for a US$3.5 million total of prizes; including a $2 million first prize, a $1 million second prize, and a $500,000 third prize. The robots will be of a wide variety with some humanoid, some four-legged, and some tracked, but all will need to operate free of external power, mechanical support, and limited communications with their controllers.
The basic idea behind DRC 2015 is to make things much harder for the robots than previously.
Stephen Hawking fears robots could take over in 100 years
By Sharon Gaudin for ComputerWorld: Worried that one day we'll have robot overlords? You're in good company.
Reknowned physicist, cosmologist and author of A Brief History of Time, Stephen Hawking said this week that robots, powered by artificial intelligence (A.I.), could overtake humans in the next 100 years.
Speaking at the Zeitgeist conference in London, Hawking said: "Computers will overtake humans with AI at some within the next 100 years. When that happens, we need to make sure the computers have goals aligned with ours," according to a report in Geek.
This isn't the first time Hawking has spoken about the threat that comes along with machine learning, A.I. and robotics.
In December, Hawking said, "the development of full artificial intelligence could spell the end of the human race."
Video - Axium's Robotic Rotary Welder for Zeta Tank
This cell is divided into 4 stations: A manual loading/unloading station and three process stations where tank openings are cut and numerous components welded on.
Announcing the 2015 Soft Robotics Competitions!
The 2015 Prize for Contributions in Soft Robotics rewards academic researchers for sharing their work and advancing the field. The competitions include $10,000 in prizes!
'First heavy-duty collaborative robot' can lift 35kg
Fanuc claims that it is the first robot manufacturer to produce a heavy-duty robot designed to work safely alongside humans. Its CR-35iA robot can perform tasks involving payloads of up to 35kg without needing the protective guards and fences that have previously been needed for robots with similar lifting capacities.
Although there are already several other collaborative robots on the market, most are designed for much lower payloads.
The new robot will stop automatically if it touches a human operator. A soft covering material also reduces the force of any impacts and prevents human operators from being pinched by the mechanism. And if the robot comes too close to an operator, they can simply push it away. The covering has a green colour to distinguish it from Fanuc’s usual yellow robots.
The six-axis robot is designed for duties such as transferring heavy workpieces or assembling parts. By avoiding the need for safety barriers, it is claimed to improve production efficiencies and allow higher levels of automation.
Building Enthusiasm for Construction Robotics
Vicki Speed for Inside Unmanned Systems: It would seem that robotic systems could provide an extra measure of safety, as well as a higher level of efficiency and machine-consistent quality. Yet, to date, the use of robotic systems on construction jobsites has been minimal. The building industry, however, is looking with fresh eyes at robots—including at least three new systems expected to be available this year—with a focus on near-term efficiencies that make investment in the systems make sense.
Demolition Days
Among the first fully-realized applications of robots in the construction environment are those used to support work that comes at the end of a structure’s life, namely demolition. In fact, remotely operated demolition robots have been around for more than a decade.
Robotic Building Blocks
The short answer is, ‘Yes.’ There are robotic systems in development around the world that can lay bricks, set tile or finish concrete floors.
Bionic Builders?
While not autonomous systems, robotic exoskeletons, those high-tech wearable suits seen in futuristic movies that help mere mortals defend Earth against other beings, could be a very real part of tomorrow’s jobsite and a possible precursor to autonomous robots in the field.
Microsoft HoloLens gets real with robotics, surgery, architecture
Jared Newman for PCWorld: At the 2015 Build conference, Microsoft tried to prove that HoloLens is more than just a neat gimmick.
The company showed off several new demos for its “mixed reality” headset, which can map digital imagery onto the user’s physical surroundings. While previous demos had focused on fun ideas like a virtual Mars walk and a living room-sized version of Minecraft, the Build presentation emphasized real-world applications for businesses and education.
For instance, Microsoft showed how architects could use HoloLens to interact with 3D models, laid out virtually in front of them on a table. They might also be able to examine aspects of a building site at full scale, with virtual beams and walls rendered before their eyes.
Not all the presentations were so serious. Microsoft also showed off an actual robot whose controls appeared in the virtual space above the robot’s head. Users could then create a movement pattern for the robot by tapping on the ground. Another demo showed how users could create their own personal screens that followed them around in real space.
ABB launches YuMi and acquires gomTec
ABB leapt into the collaborative robotics space at the Hannover Messe trade show by launching their two-armed YuMi robot and simultaneously announcing their acquisition of German startup gomTec
Service Robots Use Flat Motors
Service robots being designed for the disabled must be reliable, safe, and easy to use. Having the right motion system components is essential for these highly specific applications.
Festo BionicANTs and eMotionButterflies
From Festo Bionic:
With the bionic butterflies, for the first time Festo combines the ultralight construction of artificial insects with collision-free flying behaviour in a collective. For coordination purposes, the eMotionButterflies make use of a guidance and monitoring system, which could be used in the networked factory of the future... (additional info)
Like their natural role models, the BionicANTs work together under clear rules. They communicate with each other and coordinate their actions and movements among each other. The artificial ants thus demonstrate how autonomous individual components can solve a complex task together working as an overall networked system... (additional info)
February Was Another Good Month For Robotic Investments
February was another big month for investments in robotic startup companies. 3D Robotics, Flyability, Fetch Robotics, EHang and many others.
Is A Sperm Robot Coming To You?
Single-cell management has traditionally been accomplished with pipettes, optical tweezers, or specialized small volume designs. Now, other bio-inspired methods rely on controlling applied magnetic forces, such as the wireless control of microrobots.
What You Wanted To Know About AI
Run down of the state of AI from FastML:
Let’s take a look at how advanced we are, really. Two representative and well known examples of the current state of the art are:
Automatic image annotation using a combination of convolutional and recurrent neural networks
DeepMind’s deep reinforcement learning for playing Atari games
(cont'd at FastML)
Records 2026 to 2040 of 2052
First | Previous | Next | Last
Engineering - Featured Product
Datanomix Production Monitoring
Datanomix Production Monitoring delivers instant visibility into your shop floor performance. Through real-time alerts, simple machine connectivity, and our kick-ass coaching, you'll catch inefficiencies early, align your team with meaningful metrics, and respond faster to issues before they escalate. The software adapts without operator input and works out of the box with purpose-built Tracks (Efficiency, Delivery, Tooling, and more). Production Monitoring arms you with the data to make more, waste less, and lead with confidence. And while real-time visibility keeps you sharp in the moment, historical insights ensure you're learning from the past to drive ongoing continuous improvement.
Manufacturing and Automation - Featured Company
CSP US Inc.
As a software manufacturer, CSP GmbH & Co. KG offers its customers bespoke solutions for the discrete manufacturing applications. This makes it easy to secure and document the quality of production processes - from development to delivery!
