EXAIR’s CE Compliant Line of Air Knives

Visit https://exair.co/184-sakpr for further information

EXAIR's family of Air Knives (Super Air Knife, Standard Air Knife, and Full-Flow Air Knife) provides a laminar curtain of air that can be used for blowoff, cleaning, drying and cooling applications. Independent laboratory tests certify that EXAIR's Air Knife Systems have met the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark. Plus EXAIR manufactures them in a large variety of custom materials and designs.

12/11/24, 12:34 PM | Supply Chain, Engineering | EXAIR

EXAIR's family of Air Knives (Super Air Knife, Standard Air Knife, and Full-Flow Air Knife) provides a laminar curtain of air that can be used for blowoff, cleaning, drying and cooling applications. Independent laboratory tests certify that EXAIR's Air Knife Systems have met the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark. Plus EXAIR manufactures them in a large variety of custom materials and designs.

By entraining high volumes of room air, EXAIR's Air Knife Systems use less compressed air and less energy than other blowoff products. With their small profiles they can be mounted to accommodate many industrial applications involving conveyors and webs, even in tight spaces. EXAIR manufactures Air Knife Systems in aluminum, 303 stainless steel, 316 stainless steel and PVDF for corrosive environments. Available stock sizes range from 3″ (76mm) to 108″ (2743mm). These Air Knives meets OSHA maximum dead-end pressure and noise requirements. https://exair.co/184-sakpr
EXAIR is offering a special right now on all of their Super Air Knives. Learn more at https://exair.co/184-sakpromo

12/11/24, 12:34 PM | Supply Chain, Engineering | EXAIR
Subscribe to Newsletter
More Supply Chain News | Stories | Articles

Featured Product

PickerPal Products provides full case pick module protection to protect employees from falls.

PickerPal Products provides full case pick module protection to protect employees from falls.

PickerPal has two independent, spring-loaded arms that are self closing, which is preferred by OSHA. 3 arms are used when a kick plate is required. OSHA states that when an employee is within 4' of the edge, the area changes from a pallet position to a, "walking/working surface," which requires a kick plate or a third arm. The spring-loaded arms open on contact with the loaded skid and close on their own as products are off-loaded. This design provides multiple benefits: • Top arms close as product is removed, creating a safety gate, and the third arm closes when the empty pallet is removed. • Empty pallet positions are no longer a safety hazard. • Each are is easily replaced without removing the entire assembly.
More Products
Feature Your Product