PROFINET and PROFIBUS Cables Upgraded to PLTC-ER Rated

The original PLTC certification allowed the products to extend outside of the cable tray 6 ft (1.8 m). With the upgraded PLTC-ER certification, these products can extend up to 50 ft (15 m) outside of the cable tray without additional protection e.g. conduit, armoring, etc.

WEST DUNDEE, Illinois - HELUKABEL, one of the leading global manufacturers and suppliers of cable, wires and accessories, recently announced that select PROFINET and PROFIBUS cable products have earned a Power-Limited Tray Cable - Exposed Run (PLTC-ER) certification to stay ahead of the curve as industry trends change. The product specific cable types being upgraded are: PROFINET Type A, PROFINET Type B, and PROFIBUS DP.


The original PLTC certification allowed the products to extend outside of the cable tray 6 ft (1.8 m). With the upgraded PLTC-ER certification, these products can extend up to 50 ft (15 m) outside of the cable tray without additional protection e.g. conduit, armoring, etc.

PROFINET Type A is rated Category 5e. It can be used in environments that vary in temperature between -40°F and +176°F (-40°C - +80°C). The PVC jacket is flame retardant according to flame test IEC 60332-1-2 and UV-resistant according to UL 2556 Section 4.2.8.5 and UL 1581 Section 1200, respectively. Additionally, the PROFINET Type A is UL recognized under PLTC-ER 75°C according to UL 13 for the United States, c(UL)us Listing Type CMG 75°C according to UL 444 for the United States and Canada, and meets the standards according to CE and RoHS.

PROFINET Type B is rated Category 5e. It can be used in environments that vary in temperature between -40°F and +176°F (-40°C - +80°C). The PVC jacket is flame retardant according to flame test IEC 60332-1-2 and UV-resistant according to UL 2556 Section 4.2.8.5 and UL 1581 Section 1200, respectively. Additionally, the PROFINET Type B is UL recognized under PLTC-ER 75°C according to UL 13 for the United States, c(UL)us Listing Type CMG 75°C according to UL 444 for the United States and Canada, and meets the standards according to CE and RoHS.

PROFIBUS DP has a stranded pair and a violet outer jacket. It can be used in environments that vary in temperature between -40°F and +176°F (-40°C - +80°C). The special PVC jacket is flame retardant according to the FT4 Vertical-Tray Flame Test according to UL 2556 Section 9.6 and UL 1685 Section 12 to 19. Additionally, the PROFIBUS DP is UL recognized under PLTC-ER 75°C according to UL 13 for the United States, c(UL)us Listing Type CMG 75°C according to UL 444 for the United States and Canada, and meets the standards according to DESINA, CE and RoHS.


###
About HELUKABEL USA
HELUKABEL USA, Inc. is the wholly owned U.S. subsidiary of HELUKABEL GmbH, a leading international manufacturer of cables and wires with 55 locations in 36 countries throughout the world. In its 75,000-square-foot, suburban-Chicago facility HELUKABEL USA stocks over 4,000 cables, wires and accessory line items for a multitude of industrial and commercial applications across a wide range of vertical market segments. Direct access to a 1.72 million-square-foot, fully automated warehouse with 33,000 line items, enables HELUKABEL USA to provide extremely short delivery times.

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.