Low Cost Conveyor For Materials Up To 900ºF

EXAIR's new 2.5" and 3" High Temperature Line Vac Conveyors convert hose, tube, or pipe into a powerful in-line conveying system for high temperature materials up to 900ºF (482ºC). These air operated conveyors are available with smooth ends, to fit into hose or tube and secured with a simple hose clamp or they are available with NPT threaded ends, to mount onto threaded pipe. They feature large throat diameters for maximum throughput capability.

EXAIR's new 2.5" and 3" High Temperature Line Vac Conveyors convert hose, tube, or pipe into a powerful in-line conveying system for high temperature materials up to 900ºF (482ºC). These air operated conveyors are available with smooth ends, to fit into hose or tube and secured with a simple hose clamp or they are available with NPT threaded ends, to mount onto threaded pipe. They feature large throat diameters for maximum throughput capability.

The High Temperature Line Vac Conveyors eject a small amount of compressed air to produce a vacuum on one end, resulting in high output flows on the other. The response is instantaneous. Regulating the compressed air pressure provides infinite control of the conveying rate. High Temperature Line Vacs are CE compliant and available in seven sizes from 3/4" to 3". Construction is durable Type 303 or Type 316 stainless steel to resist high temperature, corrosion and contamination. Applications include sampling hot flue gases, exhausting fumes, conveying soot, ashes, salts and other hot debris. Other models for hopper loading, scrap trim removal, small part transfer and packaging are available. www.exair.com/184/303htlv.htm

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.