Reflex Photonics to show its new-generation 150G LightVISION industrial optical transceiver at SPIE Photonics West 2018
Reflex Photonics will proudly launch its new LightVISION industrial optical transceiver solution at the upcoming SPIE Photonics West 2018 exhibition.
Reflex Photonics will proudly launch its new LightVISION industrial optical transceiver solution at the upcoming SPIE Photonics West 2018 exhibition.
The LightVISION has been especially designed for data intensive imaging and machine vision applications that require high-resolution cameras, sensors, LIDAR, and surveillance cameras. The LightVISION can be deployed in harsh environments found in smart cars and smart cities applications.
The LightVISION optical interconnect solution can support a bandwidth of up to 150 Gbps over 100 meters. Furthermore, it is offered with a standard MTP/MPO snap-in interface that facilitates its integration into commercial products. The LightVISION is highly flexible: it is offered as a 2 to 12-lane (transmit or receive), or as a 4-lane duplex transceiver. All modules operate at up to 12.5 Gbps per lane at ultra-low bit error rates of 10-15.
Reflex Photonics' Product Manager, Guillaume Blanchette comments:
"The LightVISION small-form factor is particularly well suited for the new generation of high-speed, high-bandwidth 40GigE cameras. Its revolutionary technology reduces SWaP and improves overall design and ruggedness of these instruments.
Compared to QSFP+, the Reflex Photonics LightVISION occupies 7 times less space, has multiple board mounting option, and consumes less power."
Featured Product
PickerPal Products provides full case pick module protection to protect employees from falls.
PickerPal has two independent, spring-loaded arms that are self closing, which is preferred by OSHA. 3 arms are used when a kick plate is required. OSHA states that when an employee is within 4' of the edge, the area changes from a pallet position to a, "walking/working surface," which requires a kick plate or a third arm. The spring-loaded arms open on contact with the loaded skid and close on their own as products are off-loaded. This design provides multiple benefits: • Top arms close as product is removed, creating a safety gate, and the third arm closes when the empty pallet is removed. • Empty pallet positions are no longer a safety hazard. • Each are is easily replaced without removing the entire assembly.
