Tolomatic adds extreme-force capability to electric linear rod actuator offering
Tolomatic's new electric linear rod actuator is more efficient, accurate and flexible compared to hydraulic cylinders--and without the messy leaks or noisy operation of hydraulics.
Tolomatic adds extreme-force capability
Tolomatics new electric linear rod actuator is more efficient, accurate and flexible compared to hydraulic cylinders--and without the messy leaks or noisy operation of hydraulics.
HAMEL, Minn. - Tolomatics new RSX hydraulic-class electric linear rod actuator meets the need for extreme forces and is an ideal choice for replacing hydraulic cylinders. Designed and tested for 100% duty cycle, the actuators roller-screw drive ensures long, consistent life. Applications include pressing, punching, stamping; riveting, fastening, joining; injection molding; and sawmilling.
The Tolomatic RSX family of hydraulic-class actuators will be capable of 50,000 lbf/222.5 kN or higher. The initial offering, the RSX-096, is capable of 30,000 lbf. The actuators heavy duty construction includes tie-rods and Type III hardcoat anodized aluminum or zinc-plated steel. A standard anti-rotate feature prevents the rod from rotating without external guidance. Rated IP67, the actuator resists water from a light washdown and dust from outdoor environments. The RSX actuator is also designed and rated for extreme conditions including cold-weather operation.
Tolomatics "Your Motor Here" feature allows for servo motors and gearboxes up to 215mm frame size. Additional features include an access port for re-lubrication to maximize service life and a breather/purge port to prevent ingress into the actuator.
About Tolomatic
For more than 60 years, Tolomatic has been a leading supplier of electric linear actuators, pneumatic actuators and power transmission products for factory automation. Its extensive product line also includes servo-driven high-thrust actuators, servo motors and stepper motors, stepper drives and configured linear-motion systems. Tolomatics electric linear and pneumatic actuators are used in a variety of industries, including the packaging, material handling, medical, food processing, automotive, semiconductor and general automation industries. For more information, contact Tolomatic, 3800 County Road 116, Hamel, MN 55340. Phone: 763-478-8000 or 800-328-2174. Website: www.tolomatic.com.
Featured Product
PickerPal Products provides full case pick module protection to protect employees from falls.
PickerPal has two independent, spring-loaded arms that are self closing, which is preferred by OSHA. 3 arms are used when a kick plate is required. OSHA states that when an employee is within 4' of the edge, the area changes from a pallet position to a, "walking/working surface," which requires a kick plate or a third arm. The spring-loaded arms open on contact with the loaded skid and close on their own as products are off-loaded. This design provides multiple benefits: • Top arms close as product is removed, creating a safety gate, and the third arm closes when the empty pallet is removed. • Empty pallet positions are no longer a safety hazard. • Each are is easily replaced without removing the entire assembly.
