Okuma’s MA-12500HW Horizontal Machining Center with New W-Axis is Ideal for Cutting Exotic Materials

The combination of speed and power on the MA-12500HW is well suited for large part aerospace machining.

The hallmark of the MA-12500HW is its ability to provide a good balance of speed and cutting power for machining difficult-to-machine materials, cast iron and aluminum alloys. This makes it well suited for large part aerospace machining. The W-axis allows for a longer tool stroke to machine complex, difficult to reach part features. It has a maximum tool length of 1,100 mm. At IMTS 2016 the MA-12500HW will be shown with the new W-axis option and in skeleton form. It will feature a cutting simulation of a steel construction frame.

Key Features of Okuma's MA-12500HW Horizontal Machining Center
Built on an integral bed and base, and designed with reinforcing ribs for increased stability and load carrying capacity, the MA-12500H incorporates Okuma's exclusive Thermo-Friendly Concept to achieve maximum thermal stability and accuracy. Standardly-equipped with a 50 taper 6,000 rpm, 60/50 horsepower spindle, it is also available with either a 12,000 rpm wide range spindle or 4,500 rpm heavy duty spindle.
Maximum load capacity of 11,000 pounds
Rapid traverse (X, Y, Z) of 1,653 ipm
Maximum part size: 78.72" diameter x 58.07" high
Axis travels: X-86.61", Y-58.07", Z-64.96"
.001 degree B-axis rotary table
49.21" square pallet
Parallel-type 2 pallet APC
81 tool matrix ATC standard, up to 171 tool matrix optional
For more information on Okuma's MA-12500HW horizontal machining center visit http://www.okuma.com/ma-12500h.

Featured Product

EXAIR’s Super Air Knife

EXAIR's Super Air Knife

EXAIR's Super Air Knife is a quiet, hard-hitting curtain of air that dramatically reduces compressed air usage and noise when compared to other blowoffs. The Super Air Knife offers a more efficient way to clean, dry or cool parts, webs or conveyors. It delivers a uniform sheet of laminar airflow across the entire length with hard-hitting force. Noisy blowoffs become a whisper when replaced with the compact Super Air Knife. Even at high pressures of 80 PSIG (5.5 BAR), the sound level is surprisingly quiet at 69 dBA for most applications! Air amplification ratios (entrained air to compressed air) of 40:1 are produced. Meets OSHA maximum dead-end pressure and noise requirements. See the Super Air Knife in action at https://exair.co/watchairknives?pub=184.akv Special promotion is available now. www.exair.com/184/sakpromopr.htm