binder USA Introduces M16 Connectors with High Pin Counts for 5G Networks

The latest M16 connectors from Binder USA, LP, are designed to meet the data speeds, high frequencies, and tight space requirements for 5G wireless networks. Binder's M16 connectors can now accommodate up to 24 contacts and transmit data at speeds up to 10Gbit/s. The connectors are compact at 18.5 mm in diameter and 60 mm in length, with special short and right-angled versions available with a height of just 37 mm. The connectors are compliant with AISG C485 standards, providing international protection for selected outdoor installations.

binder USA Introduces M16 Connectors with High Pin Counts for 5G Networks


The latest M16 connectors from Binder USA, LP, are designed to meet the data speeds, high frequencies, and tight space requirements for 5G wireless networks. Binder's M16 connectors can now accommodate up to 24 contacts and transmit data at speeds up to 10Gbit/s. The connectors are compact at 18.5 mm in diameter and 60 mm in length, with special short and right-angled versions available with a height of just 37 mm.

The connectors are compliant with AISG C485 standards, providing international protection for selected outdoor installations. (AISG - the Antenna Interface Standards Group - defines standards for the control and monitoring of antenna line devices in the wireless industry.) Optimized with 360° EMI shielding, the connectors are rated up to IP68 when connected, providing reliable performance in harsh outdoor environments.

binder USA's compact M16 connectors are widely used in instrumentation, measurement, and sensors, where space is limited and/or higher pin counts are required than those offered M8 and M12 connectors. Applications include: pneumatic controls, gas and pressure measurement, torque sensors, and motor-speed regulators, among many others.

binder M16 connector highlights:
• binder series: 423 and 723
• Data transmission speed: Up to 10 Gbit/s
• Protection: up to IP68
• Solder/crimp/screw termination
• Cable range: 4 mm to 10 mm in diameter
• Rated voltage: 250V (impulse voltage to 1500V)
• Rated current: 7A (at 40°C)
• DIN EN 61076-2-106

Featured Product

Dynatect Automated Machine Safety Roll-Up Doors

Dynatect Automated Machine Safety Roll-Up Doors

Need to increase safety? Are you using light curtains? Is space a concern? Dynatect's Gortite® VF Automated Machine Safety Door combines safety technology, speed, and a physical barrier to isolate hazardous operations. Use of a physical barrier with safety sensors can save up to 30 square feet of manufacturing space. Using the ANSI minimum safety distance formula, the Gortite® VF Door limits the depth penetration factor and average approach speed, allowing closer location of the safeguarding device. Unlike light curtains, which can't contain process hazards, an automated machine safety door can isolate common workplace debris. This physical barrier is designed to contain process driven hazards such as weld sparks, UV flash, and light debris. Thus, the operator can maintain closer proximity to the work area improving ergonomics and productivity.