MVTec MERLIC 2.1 makes imaging even more user-friendly

 Minor release on June 20, in time for AUTOMATICA  Improved usability for even easier creation of machine vision applications  MERLIC 2.1 is available worldwide

Inside 3D Printing Conference & Expo in Seoul to Co-locate with RoboUniverse and the Virtual Reality Summit in Association with the Korea International Exhibition Center (KINTEX)

The largest professional 3D printing event worldwide is confirmed to run alongside RoboUniverse and the Virtual Reality Summit at the Korea International Exhibition Center (KINTEX) on June 22-24, 2016.

Special Tradeshow Coverage for RAPID 2016

RAPID 2016 will be held from May 17th - 19th in Orlanda, FL. This ManufacturingTomorrow.com Special Tradeshow report aims to bring you news, articles and products from this years event.

Hardware vs Soft Motion Control: Costs and Performance Compared

Businesses succeed when they produce quality products at lower cost and faster time to market than their competitors.

With Smart Manufacturing Magazine, Industry Events, SME Shares Advanced Manufacturing Expertise

SME's new publication, Smart Manufacturing, along with other SME initiatives are planned throughout 2016 to guide manufacturing professionals through an all-new era of making things, often referred to as the Fourth Industrial Revolution.

Global Research Finds Companies Desperate for Technology Leadership but Overlooking Tech-Savvy Millennials

Organizations Must Act Now to Address the Human Capital Dilemma with Technology to Attract, Engage and Support the Next-Gen Workforce to Fuel Growth

Stäubli to host Automotive Technology Days 2016

The Automotive Technology Days will be an exciting event geared towards those automotive professionals who want to maximize profit and value in their workflows.

How Microfactories Can Bring Iterative Manufacturing to the Masses

ANDREW O'KEEFE and JASON DORRIER for Singularity Hub:  Humans manufacture a mind-numbing amount of stuff each year—ever wonder how we do it? In the past 100 or more years, it’s been all about economies of scale. This means you should make a lot of a thing because the more you make, the more your fixed expenses get spread out. This reduces the cost of each unit, from light bulbs to iPhones. Here’s the problem. It’s expensive to do a big manufacturing run. So, how do you know what to make in the first place? Often, it’s an educated guess based on prototypes and limited feedback, but you don’t really know until you try to sell a product—and by then, you’re fully committed, succeed or fail. Jay Rogers of Local Motors wants to upend common wisdom. Manufacturers should run through tons ofpotentially good ideas and then test them out to see if people actually want what they’re making before going full scale. And Rogers thinks microfactories are the way to do it.   Cont'd...

Maplesoft is now a SOLIDWORKS® Solutions Partner

Easy integration of Maple and MapleSim CAD Toolbox with SOLIDWORKS

Molex SL™ Wire-to-Wire Modular Connector System from Newark element14 for communications and industrial applications

Design flexibility for low-power signal applications in communications, industrial, automotive, medical and consumer electronics

RAPID - SME and Rapid News Publications Ltd to Partner on RAPID Event Beginning in 2017

The two organizations are combining their nearly 30 years of insights and experience in accelerating the adoption and advancement of 3D manufacturing technologies and are confident that the new event, to be renamed RAPID + TCT, will result in an increased impact on the U.S. manufacturing industry.

Quadrant CEO Says Automation Creates More Jobs Than It Replaces by 2:1

Despite alarmist predictions to the contrary, the development of newer and better ways to do things will lead to broader employment, better jobs and increased prosperity, per Quadrant Information Services CEO Michael Macauley.

Robots Helping Grads Get Jobs

Not many students can claim they have hands-on experience with automation and robotics going into an interview. Looking at the question with a macro lens, our students are offered job opportunities on being well-rounded, even at the sophomore-level when many accept summer/semester-long internships.

Industry 4.0 Propels Manufacturers to Cross-Industry Innovations

NEXCOM has planned four themed demonstrations that map out a complete solution blueprint for Industry 4.0 at the upcoming world leading trade fair for industrial technology, Hannover Messe.

AppDynamics to Speak at Internet of Things North America: "Efficiency in the Connected Factory"

Session focuses on ERP innovation in the modern factory

Records 976 to 990 of 1590

First | Previous | Next | Last

Design & Development - Featured Product

Emulate3D Engineering Software Creates Your Advantage

Emulate3D Engineering Software Creates Your Advantage

Emulate3D software helps you model and test your AMHS solutions rapidly. Use Demo3D to create running models quickly, then generate videos, stills, or view the models in virtual reality at the click of a button. Sim3D enables you to carry out experimental test runs to select optimal solutions and the most robust operating strategy, and Emulate3D Controls Testing is the best way to debug your PLCs offline, and off the project's critical path. Connect to major PLCs, import CAD, and plug into HTC Vive and Oculus Rift to produce awesome models!