Novotechnik - Ultra-Compact Hollow Shaft Angle Sensors

Novotechnik, U.S. introduces the new WAL 200 Series of hollow shaft angle sensors that provide absolute, rotary position. Sensor dimensions are 7 x 22 mm. The WAL 200 Series has a measurement range of 0 to 340°. Mechanical range is a continuous 0 to 360°.

Southborough, MA… Novotechnik, U.S. introduces the new WAL 200 Series of hollow shaft angle sensors that provide absolute, rotary position. Sensor dimensions are 7 x 22 mm.

The WAL 200 Series has a measurement range of 0 to 340°. Mechanical range is a continuous 0 to 360°.

Other key specifications include resolution of < 0.3°, repeatability of 0.3° and independent linearity of ±1 % of measurement range.

As an absolute sensor, the WAL 200 Series continues to track angle even if power is removed, reporting the correct position when power is restored.

WAL 200 Series sensors have a minimum life of 2 million mechanical movements. Cable and connector versions are available.

For more information contact Novotechnik U.S., Inc., 155 Northboro Road, Southborough, MA 01772 • Phone: 508-485-2244 • Fax: 508-485-2430 • Web: www.novotechnik.com/wal200

Featured Product

KINGSTAR Soft PLC - Replace Your PLC with an EtherCAT-enabled Soft PLC for Real-Time Motion Control and Machine Vision

KINGSTAR Soft PLC - Replace Your PLC with an EtherCAT-enabled Soft PLC for Real-Time Motion Control and Machine Vision

The top machine builders are switching from proprietary hardware-based PLCs, like Allen-Bradley, TwinCAT, Mitsubishi and KEYENCE, to open standards-based EtherCAT-enabled software PLCs on IPCs. KINGSTAR provides a fully-featured and integrated software PLC based on an open and accessible RTOS. KINGSTAR Soft PLC also includes add-on or third-party components for motion control and machine vision that are managed by a rich user interface for C++ programmers and non-developers alike.