Novotechnik - New Angle Sensors With CANOpen Output

RFC4800 Series now features a CANopen ouput version that is CiA DS-301 compliant.

Southborough, MA… Novotechnik, U.S. introduces the RFC4800 Series of touchless programmable rotary angle sensors that provide absolute, rotary position. Their magnetic technology makes measurements through air and non-magnetic materials.


RFC4800 Series now features a CANopen ouput version that is CiA DS-301 compliant.

The RFC4800 Series utilizes a magnetic pickup to provide a touchless measurement range of 0 to 360°. Key specifications include ingress protection from liquids and dust to the IP 69K standard, resolution of 14 bits, repeatability of 0.36° and independent linearity of ±0.5 %.

A magnetic pickup mounts to a shaft on users application with seven different size markers available for dimensional flexibility and to optimize detection for different applications.

A good degree of customization is built into the RFC4800 Series. Offset, scale, direction of rotation, steps over position measurement range, reporting of speed by channel, limit switches and their initial state as well as baud rate are all programmable.

RFC4800 Series sensors with CANOpen output have an operating temperature range of -40°C to +105°C. Cable and connector versions are available.

For more information contact Novotechnik U.S., Inc., 155 Northboro Road, Southborough, MA 01772 • Phone: 508-485-2244 • Fax: 508-485-2430 • Web: www.novotechnik.com/rfc48

Featured Product

Bitflow is the leader in CoaXPress

Bitflow is the leader in CoaXPress

With the introduction of its Cyton and Karbon CXP frame grabbers, BitFlow has established itself as the leader in CoaXPress (CXP), a simple, yet powerful, standard for moving high speed serial data from a camera to a frame grabber. With CXP, video is captured at speeds of up to 6.25 Gigabits/Second (Gb/S). Simultaneously, control commands and triggers can be sent to the camera 20 Mb/S (with a trigger accuracy of +/- 2 nanoseconds). Up to 13 W of power can also supplied to the camera. All this happens over a single piece of industry standard 75 Ohm coaxial cable. Multiple CXP links can be aggregated to support higher data rates (e.g. four links provide 25 Gb/S of data). BitFlow CXP frame grabbers open the door to applications where cable cost, routing requirements and long distances have prevented the move to high resolution, high speed digital cameras. In many cases, existing coaxial infrastructure can be repurposed for CXP with very low installation costs.